Total Marine ServicesAntifouling

Heavy fouling growth can greatly reduce the performance of your boat, creating drag and making it slower in the water. This will also reduce your craft's fuel efficiency. Prolonged fouling growth can cause damage to your boat's hull and lead to expensive repairs.

We operate a professional Antifouling service for all boats in the Swansea , Gower and South Wales area. We have been authorised and endorsed by Seajet Yacht Paints to provide our customers with latest technology and advice on maintaing their Antifoul. Using either traditional methods of Antifoul preparation or sand/soda blasting methods our service can be tailor made to suit your exact requirements. The Antifouling of sail drives, out drives and propellers are another vital part of your boats maintenance routine where SEAJET pellerclean is leading the way according to boating literature.  We can provide your Antifouling materials or use materials provided by yourself, whichever you choose you can be assured of practical and unbiased advice.

Which antifoul should I use?

The severity of fouling can vary dramatically depending upon the temperature, water salinity, water flow, time of year and amount of sunlight.

Most anti-foul coatings are designed to cope with a wide spectrum of fouling and generally speaking there are three main types of antifouling, for a range of hull types and mooring conditions:-

Self Polishing (eroding) - the popular choice

As the term suggests, think of a bar of soap and this helps to describe the relative soft nature of these products and how they work.

Through the flow of water across the hull a fresh layer of biocide is continually exposed on the outside to repel any fouling. Provided that sufficient coats are applied from the outset, multi-season performance can be expected, saving you time and money.

Once applied an annual check and jet-wash on the hull, to revive the coating, is normally all that is needed. Most users find that the overall performance of self polishing antifouling is very hard to beat.

Understandably boats with drying moorings are not really suited to these products.

Hard types

These products have a general appeal and will work just as well in a range of conditions including salt and fresh water. Due to the leaching nature of the biocide, these products do not erode as such and can be used for drying moorings.

Hard types are resistant to abrasion and often favoured by racers who can burnish the hull with wet & dry prior to launching.

Hard types can be effective up to very high boat speeds of up to 70 knots and often favoured by powerful motorboat owners. These products are best
re-applied on an annual basis.

Non biocidal, foul release types

These work due to the slippery nature of the surface, which fouling finds difficult to adhere to. As a result they are not normally suitable for drying moorings.

The other major benefit, is less water resistance on the hull, meaning better fuel economy and more responsive handling through the helm.

To receive a quote by email, please use our contact page. Don't forget to include the boat's details and where it is located and will will endeavour to answer you as quickly as possible.

Total Marine Services (Swansea Marina, South Wales) are an approved application centre for:

Seajet 034 Emperor

Seajet 033 Shogun

Seajet 038 Alusafe

Seajet 031 Samurai

Seajet 037 Coastal

Seajet Speed

Seajet Pellerclean

Antifoul Removal and application is available.